Single safety task
One detector replaced or one furnace filter swapped
$65
Home maintenance · Calgary
Smoke detectors, CO detectors, filters — all done in one visit.
Expired smoke detectors swapped, CO alarms installed, furnace filters changed and hard-to-reach maintenance tasks handled in a single visit so the list actually gets done.
- ✓ Code-compliant placement
- ✓ All detector types
- ✓ Furnace filter swap
- ✓ Hard-to-reach tasks
- ✓ Same-day quotes
Pricing
Flat pricing by visit type. Send us your task list and we confirm what is included before booking.
Safety check visit
All detectors checked, expired units replaced, filter swapped — full home
$95
Full maintenance visit
Detectors, filter, hard-to-reach bulbs, fan check and full task list
$145
Rental annual visit
Annual safety compliance check for rental properties — documented
Get a quote
- Common detector brands included in the visit price — customer may also supply specific brands
- Furnace filter is customer-supplied or we advise on the correct size and pick one up
- Written record of all replacements and install dates provided after every visit
- Rental annual visits are quoted individually based on property size and scope
Why Calgary homeowners book this
Most smoke detectors expire 10 years from manufacture — not install
The expiry date is printed on the back of the detector. Calgary homes often have detectors installed during a renovation in the 1990s or 2000s that have been sitting on the ceiling expired for years. A chirp every 30–60 seconds is the first sign — check the manufacture date before just replacing the battery.
Alberta fire code requires detectors on every level
Every storey of a dwelling — including the basement — needs a working smoke detector, and one must be within 5 metres of each sleeping room. We confirm placement meets code on every visit and advise if additional detectors are needed.
Furnace filters clogged beyond 90 days reduce HVAC efficiency
Calgary's heating season runs from October through April — the furnace runs heavily for 6 months. A clogged filter forces the furnace to work harder, increases energy costs and can cause overheating. Most filters need replacing every 60–90 days during heating season.
What is included
- Check manufacture date on all smoke detectors
- Replace expired or non-functional detectors
- Confirm detector placement meets Alberta fire code on each level
- Install CO detector near sleeping areas if absent
- Test all new and existing detectors after install
- Replace furnace filter — advise on correct MERV rating for your system
- Replace any non-functional hard-to-reach light bulbs
- Test bathroom and kitchen exhaust fan function
- Complete any other requested maintenance items on the list
- Note what was done and what dates to schedule next service
- Cleanup packaging and old detector disposal
- Leave written record of all replacements and install dates
How to book
Send photos
Send a photo of an existing detector (showing the unit on the ceiling), the furnace filter slot and any other tasks you want handled. A list of tasks is fine if photos are not practical.
Get a quote
We reply the same day with a flat price covering all the tasks. Approve and pick a time — we confirm the exact scope on arrival so nothing gets missed.
Job done
We work through the full list, test everything before we leave and hand you a written record of what was replaced and the dates — useful for insurance, landlord records and future scheduling.
What's included — and what isn't
Included in every job
- Manufacture date check on all existing detectors
- Replacement of expired or failed units
- Alberta fire code placement confirmation
- Test of all detectors after install
- Furnace filter swap with MERV rating advice
- Written record of all replacements and dates
Not in standard scope
- Hardwired detector replacement (electrical permit may be required)
- HVAC system service or inspection (requires HVAC technician)
- Duct cleaning (separate service)
- Electrical panel or wiring work
If detectors are hardwired (connected to house wiring rather than battery-only), we advise on the replacement options — some hardwired units have a battery backup and can be swapped without an electrician.
Who books this service
Smoke detectors over 10 years old
Most homeowners do not know smoke detectors expire 10 years from manufacture. We check the date printed on the back of every unit and replace any that are expired or non-functional.
Moving into a previously owned home
When you move into a home, the age of the safety equipment is unknown. We check every detector, confirm placement meets Alberta fire code and replace anything that is expired.
Rental property compliance visit
Alberta requires landlords to maintain working smoke and CO detectors. We complete the inspection, replace expired units and provide a written record of what was installed and when.
Furnace filter change long overdue
A clogged furnace filter reduces HVAC efficiency and can cause overheating. We swap the filter for the correct size and advise on the right MERV rating for your system.
Hard-to-reach light bulbs burned out
High ceiling bulbs, stairwell fixtures and recessed lights in hard-to-reach spots stay burned out for months. We bring the right ladder and swap them all in one visit.
Gift for an elderly parent or relative
A home maintenance visit is a practical gift that gets the safety equipment up to date for someone who cannot safely change detectors or filters themselves.
What to have ready before we arrive
A quick prep helps us work through the full task list efficiently in one visit.
Count how many smoke detectors and CO alarms are in the home
Walk through every level including the basement and count all detectors. Note any that are chirping or that you know are old. We confirm the count and check each manufacture date on arrival — the count helps us bring the right number of replacement units.
Know the furnace filter size
The filter size is printed on the cardboard frame of the existing filter in the furnace. Common sizes are 16x25x1 and 20x25x1. If you can read the size before we arrive, we can bring the correct filter — otherwise we check the existing filter on arrival and swap it.
List any other tasks you want done while we are there
This is the visit to handle any maintenance task that has been on the list — burned-out bulbs in high fixtures, exhaust fans that are noisy, a cabinet that will not close. Give us the full list when quoting so we can confirm what is in scope and estimate the time accurately.
Tip: Check the manufacture date on the back of every detector before we arrive. If any say the manufacture year is 2014 or earlier, those units are expired — knowing this in advance confirms how many replacement units we need to bring.
★★★★★Google Review“Replaced all five smoke detectors, the CO alarm and the furnace filter in one visit. Everything was years out of date. House finally has current safety equipment.”
Smoke detectors expire — the date is printed on the back
Most homeowners do not know that smoke detectors have a 10-year lifespan from the date of manufacture, not from when they were installed. Alberta fire code requires working detectors on every level of the home and within 5 metres of each bedroom.
Calgary homes often have detectors installed during a renovation in the 1990s or 2000s that have been sitting on the ceiling expired for years. If the detector chirps once every 30–60 seconds, it is either low battery or expired — check the back for the manufacture date first before just replacing the battery.
Get a quote →Good to know
- We supply common detector brands — customer can also supply a specific brand if preferred
- Furnace filter size is printed on the existing filter frame in the furnace
- We advise on MERV rating based on your HVAC type and household situation
- Stairwell and multi-level homes need detectors on each level — we confirm placement
- CO detectors should be near gas appliances and sleeping areas — we advise on placement
- We provide a written note of what was installed and the date for your records
Frequently asked questions
How do I know if my smoke detector is expired?
The manufacture date is on a sticker on the back of the detector. Most units have a 10-year lifespan from that date. If the manufacture year is more than 10 years ago, replace the whole unit — not just the battery.
What does the chirping every 30 seconds mean?
A single chirp every 30–60 seconds means either a low battery or an expired detector. Check the manufacture date on the back first. If the detector is over 10 years old, replace the whole unit. If it is under 10 years old, replace the battery.
Where should smoke detectors be placed in a home?
Alberta fire code requires a working smoke detector on every storey of the home, including the basement, and within 5 metres of every sleeping room. Detectors should not go directly in kitchens or bathrooms — place them in the adjacent hallway.
Do I need a CO detector?
Yes, if your home has any gas appliances — furnace, water heater, gas range, fireplace — or an attached garage. CO is colourless and odourless and cannot be detected without a sensor. CO detectors should be replaced every 5–7 years.
What is the difference between a smoke detector and a CO detector?
A smoke detector senses combustion particles from a fire. A CO detector senses carbon monoxide from gas appliances or vehicles. They detect different hazards and both are required in homes with gas appliances. Combination units that detect both are available and we can install those instead.
How often should I replace the furnace filter?
Every 60–90 days under normal use. Calgary's long heating season — October through April — means the furnace runs heavily for 6 months. Homes with pets or active renovation work need filter changes every 30–60 days during heating season.
Can you replace hard-to-reach light bulbs?
Yes. We bring the appropriate ladder for stairwell fixtures, high ceilings and recessed lighting in tight spots. Bulb replacement is a common add-on during any maintenance visit — list all the bulbs you need changed when you send your task list.
What MERV rating filter should I use?
MERV 8 is appropriate for most residential furnaces — it captures dust and pollen without restricting airflow. MERV 11–13 is better for allergy sufferers but needs more frequent changes. We advise on the right rating for your system when we check the existing filter on arrival.
Can you do maintenance tasks for a rental property?
Yes. We complete annual safety compliance visits for rental properties in Calgary, Cochrane and Airdrie. We check and replace detectors, CO alarms and filters, and provide written documentation of what was installed and when — useful for landlord records and compliance.
What is Alberta fire code for smoke detectors?
Alberta fire code requires a working smoke alarm on every storey of a dwelling, including the basement, and adjacent to each sleeping area. Detectors must be functioning — an expired or low-battery unit does not meet code requirements. We confirm placement and functionality on every visit.
From the blog
- Calgary Home Maintenance by Season →
- Calgary Home Fall Maintenance Checklist (2026) →
- Rental Property Maintenance in Calgary: Landlord Obligations & What a Handyman Covers →
- Calgary Spring Home Checklist 2026: 15 Tasks After Snowmelt →
- Garage Door Maintenance in Calgary: Lubrication for -30°C & What a Handyman Covers →
- Outdoor Tap Winterizing in Calgary: Frost-Free vs. Standard Sill Cocks & Burst Prevention →
- Attic Insulation Calgary: R-Values, Blown-In vs. Batt, and What a Handyman Can Do →
- Gutter Repair in Calgary: Spikes vs. Screws, Fascia Rot and Downspout Extensions →
- Ceiling Fan Direction in Calgary: Winter vs. Summer Settings, CFM Ratings and Installation →
- Smoke Detector Placement in Calgary: Alberta Fire Code Requirements, 10-Year Units, and CO Detectors →
- Batt vs. Blown-In Insulation in Calgary: R-Values for Climate Zone 7, Attic vs. Wall Cavity, and 2026 Costs →
- Garage Concrete Floor Sealing in Calgary: Epoxy vs. Polyurea, Winter Salt Damage, and Prep Requirements →
- Furnace Filter Replacement in Calgary: MERV Ratings, Frequency, and Why the 3-Month Rule Fails Here →
- Annual maintenance visits for rental properties →
Ready to get your home maintenance done?
Not satisfied with the work? I will come back and make it right.
Request home maintenance quote or call (403) 973-5123